A-A-50371B
3.8 Marking and labeling
3.8.1 Size marking. The size of each boot shall be embossed or branded into the breast of the heel or into the outsole in the shank area close to the heel breast. Marking shall be not less than 1/2 inch in height.
3.8.2 Contractual marking. The contractual marking shall be either legibly stamped or printed with indelible ink (of a contrasting color) on the inside of the boot approximately one inch below the top edge, with letters a minimum of 1/2 inch in height, and shall contain the following information:
US SIZE
BOOTS, FIREMEN'S
CONTRACT NUMBER: SP0-100-00-0-0000 (Example)
NAME OF CONTRACTOR: STOCK NO.: 8340-00-000-0000
UPC CODE
As an alternate on the Type II boot, the contractual marking may be located on the outside of the boot just below the inside leg loop.
3.8.3 Labels and other identification. The type II boot shall have a NFPA label stating it conforms to the requirements stated in the General description paragraph. The Type I boot shall have a commercial label to indicate item nomenclature, maintenance and cleaning information. The contractor's label or trademark, and other identifying markings such as leg bands may be used. However, the height of the label shall be not more than 1-1/2 inches in height or width, and not
more than one label per boot shall be used.
3.8.4 Bar code label. Each pair of boots shall be individually bar-coded. The bar-coding element shall be a 13 digit National Stock Number (NSN), and there shall be a 12 digit UPC symbol for each NSN. The " UPC" must appear beneath the NSN. The bar-code for NSN type shall be a medium to high code density and shall be located so that it is completely visible when packaged, and causes no damage to the item. This UPC code must also be placed on all shipping cartons on which the NSN appears.
4. REGULATORY REQUIREMENTS.
4.1 Recycled recovered materials. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
5. QUALITY ASSURANCE PROVISIONS.
5.1 Product conformance. The products offered shall meet the salient characteristics of this commercial item description, conform to the producer's own drawings, specifications, standards,
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business